Answered question

Is it possible to control several roller shutters with a single remote control?

Is it possible to control several roller shutters with a single remote control?

Somfy T.
Somfy T.

Somfy T.

Level
0
-95 / 100
points
Team
Somfy T.
Somfy T.

Somfy T.

Level
0
-95 / 100
points
Team

Yes; this is possible using an additional remote control to control your motorised roller shutters at the same time; to do this, you must programme your shutters in the new remote control following the instructions below:

  • take an individual remote control
  • press the PROG button located on the back or inside for about 3 seconds
  • -> the shutter concerned should perform a little up and down movement

    • take the general remote control
    • briefly press the PROG button located on the back or inside
    • -> the shutter concerned should perform another little up and down movement to confirm it has been programmed.
      Repeat this operation with the subsequent shutters.
      Attention: the movements of your shutters are very important; they must occur each time this is noted.
      If you are unsure if you saw it, do not touch anything for 2 minutes.

Did you find this useful ?

No (0)

Yes (0)

0% of users found this answer useful

Top of page

© All rights reserved Somfy - Discover all our home automation solutions: home automation wireless, home automation boxes, our home automation partners, home automation engines, install home automation, home automation in the new home, install it home automation, buy your home automation online, the home automation alarm