Answered question

Positioning and installing the Somfy Protect radio relay

Positioning and installing the Somfy Protect radio relay

Somfy T.
Somfy T.

Somfy T.

Level
1
217 / 750
points
Team
Somfy T.
Somfy T.

Somfy T.

Level
1
217 / 750
points
Team

The radio relay extends the radio range of the Link for IntelliTAG, the motion detectors and the sirens.

Advice on positioning:
Certain precautions must be taken with the radio relay, in particular concerning its correct location in the house.
The relay must be within the Link’s radio range. If it is out of range, you will not be able to install it.
In a house with several floors, you are advised to install the Link close to the main entrance (for the purposes of badge and automatic deactivation); the radio relay should be installed upstairs
The radio range must again be taken into consideration

Installation procedure via the app:
The Link must of course be installed first.
1. First, the socket corresponding to your country should be clipped to the radio relay.
2. Access the “Settings” menu then “My equipment” then “Add equipment” and select the radio relay in the list displayed.
3. Follow the different steps displayed on the screen

The radio relay is now installed and ready to extend the radio coverage provided by your system.

Did you find this useful ?

No (0)

Yes (0)

0% of users found this answer useful

Top of page

© All rights reserved Somfy - Discover all our home automation solutions: home automation wireless, home automation boxes, our home automation partners, home automation engines, install home automation, home automation in the new home, install it home automation, buy your home automation online, the home automation alarm